Displacement of the robot

Two wheels, a back support to move the robot on the table..

What function does it fulfill ?

For the displacement of the robot, we choose two wheels and the sponge as support. The reason is simple. Thanks to this configuration, the robot is able to turn on itself. Moreover, there are no losses due to gears like on tanks. The only problem is that with two motors, if we want the robot to go straight forward, the controller has to regulate the system.

How do we regulate the system ?

The Regulation of the displacement of the robot can be very complex and we choose to simplify it as much as possible. The first thing was to add some rotary controllers to know the angular position of the wheels. Then we had a choice to make: position regulation or velocity regulation. Given that we want to clean the table randomly we don't need to know exactly where the robot is. That's why we choose a simple velocity regulation.


The motor is driven by controller because the commutation is not automatic for these kind of DC motor.

The motor is connected with 3 wires to the controller:
  • Power Supply
  • Control wire
  • Ground
  • Computer Aided Design Software

    To build this project, we had to be able to design our robot on the computer. The aim of that is to know the exact dimensions of our pieces and notice before starting the construction that things would go wrong. The program we used was INVENTOR.


    When the design on computer was done, we had to build the robot. Few years ago, the robots could be made thanks to different techniques : turning, milling, drilling. Today, the technology evolved and we used for this project laser cutting to cut our plates of plexi and 3D printing for complex pieces. The machinery was available for us at the FabLab


    The PCB is an important part of the project. It enables to connect the microcontroller with ll the different parts of the project. The creation of it requires to be precise on the band width and the place of everything. To do it, we used a program, which gather a lot of electrical components to build those boards, called Eagle